Filter Drier

Hermetic Filter Drier
Type DML/DMLE and DCL/DCLE

All ELIMINATOR® driers have a solid core with binding material held to an absolute minimum. There are two types of ELIMINATOR® cores. Type DML/DMLE driers have a core composition of 100% Molecular Sieve, while type DCL/DCLE contain 80% Molecular Sieve with 20% activated alumina.ELIMINATOR® type DML/DMLE driers are designed for applications requiring the highest moisture capacity. ELIMINATOR® type DML/DMLE driers are designed for applications requiring high moisture capacity and acid adsorption capacity. Available with solder (cu-plated steel connectors) and flare connections

The Core type DML/DMLE

  • 100% Molecular Sieve core
  • High drying capacity minimizing the risk of acid formation (hydrolysis)

The Core type DCL/DCLE

  • 80% Molecular Sieve with 20% activated alumina
  • Perfect core blend for systems that operate at high condensing temperatures and require high drying capacity

The Shell

  • DML and DCL are PED approved for PS 46 bar
  • DMLE and DCLE are PED approved for PS 50 bar
  • Available with solder (Cu-plated steel connectors) and flare connections
  • Corrosion resistant powder-painted finish. Special coating for marine applications available upon request
  • Allows installation with any orientation provided the arrow is in the flow direction
  • Available in sizes 1.5 – 75 cubic inches

The Filter

  • 25 μm (0.001 in.) filter provides high retention with minimal pressure drop
  • Thermally stable up to 120 °C

Filter Drier, Shell
Types DCR and DCRE

Danfoss ELIMINATOR® filter driers with replaceable solid core, type DCR, are for use in liquid and / or suction lines in refrigeration, freezing and air-conditioning systems. Besides being able to meet the demanding requirements of high working pressure levels when operating with R410A thanks to replaceable solid cores the DCR programme offers flexibility with respect to different applications. Available with copper connections. DCRE programme offers to be used with flammable refrigerants A2L, Group .

DCR / DCRE housing

  • PED approved for PS up to 46 bar for the DCR and up to 50 bar for DCRE
  • DCR / DCRE housing (including core holder) are made entirely of steel and are thus compatible with all refrigerants
  • DCR / DCRE housings have undergone phosphate pre-treatment and have a corrosion-resistant powder-paint finish
  • DCR / DCRE housings are helium leak tested
  • DCR / DCRE housings are allow to be used with CO2

Top covers for DCR / DCRE housings

  • Zinc-chromated steel top covers with or without external access connection

Inserts for DCR housings – strainer 48 – F strainer – compatible with all refrigerants

  • Retains dirt particles larger than 15 μm
  • For use direct in DCR housings
  • Utilised in the suction or liquid line

Inserts for DCR housings – solid cores

  • 48 - DM - 100% molecular sieve solid core suitable for HFC refrigerants
  • Provides high moisture adsorption at low and high condensing temperatures
  • Effective protection against impurities
  • 48 - DC - 80% molecular sieve and 20% activated alumina solid core suitable for HCFC refrigerants and compatible with HFC refrigerants:
  • Adsorbs moisture and acid in the system throughout the entire temperature range
  • 48 - DA - 30% molecular sieve and 70% activated alumina solid core suitable after compressor burnout and compatible with HCFC / HFC refrigerants

Inserts for DCRE housings – solid cores

  • 48 - DM
  • 48 - DC