AKS 3000
AKS 3000 is a series of absolute transmitters
with high-level signal conditioned current
output, developed to meet demands in A/C
and refrigeration applications. AKS 3000 utilizes the proved piezoresistive
measuring principle, which has been used for
decades in Danfoss pressure transmitters. The
pressure reference is a sealed gauge. This
means that atmospheric pressure variation s
have no influence on regulating accuracy. A
must in accurate low pressure regulation. All materials in contact with the refrigerant and
materials for the housing are AISI 316L stainless steel. No soft gaskets, all environmental
sealings are made through laser weldings only. AKS 3000 has a 4 – 20 mA output, and is
available with spade terminals for EN
175301-803 plug.
Features and benefits
-
Tough environment
• Vibration
• Shock during operation and transport
• Humidity and ice formation
• Temperature variations
• Corrosive media like ammonia gases and salt mist -
Convenient performance
• 4 – 20 mA signal
• 1% typical accuracy
• 0.5% typical linearity
• Prepared for high pressure refrigerants Bar code for tracing of calibration data
• Compact design • Max. working pressure 33 bar <P< 100 bar • Digitally temperature compensation Optimized accuracy at -10 °C and 20 °C for suction line installations.
• 1⁄4 -18NPT, G 3⁄8 A, G1⁄2 A or 1⁄4 flare ensures tight pressure connection • All laser welded AISI 316L stainless steel enclosure • No soft seals • For use in ATEX zone 2 explosive atmospheres
MBS 3000
The compact pressure transmitter, type MBS
3000, is designed for use in industrial and
hydraulic applications, and offers a reliable
pressure measurement, even under harsh
environmental conditions. The compact heavy duty pressure transmitter
MBS 3050 with integrated pulse-snubber is
designed for use in hydraulic applications with
severe medium influences like cavitation, liquid
hammer or pressure peaks and offers a reliable
pressure measurement, even under harsh
environmental conditions. The flexible pressure transmitter programme
covers different output signals, absolute or
gauge (relative) versions, measuring ranges
from 0 – 1 to 0 – 600 bar. A wide range of
pressure and electrical connections are
available. Excellent vibration stability, robust construction, and a high degree of EMC/EMI protection equip the pressure transmitter to meet the most stringent industrial requirements
Features and benefits
- Designed for use in severe industrial and hydraulic environments
- Resistant to cavitation, liquid hammer and pressure peaks (MBS 3050)
- Enslosure and wetted parts of acid-resistant stainless steel (AISI 316L)
- Pressure ranges in relative (gauge) or absolute from 0 up to 600 bar
- All standard output signals: 4 – 20 mA, 0 – 5 V, 1 – 5 V, 1 – 6 V, 0 – 10 V, 1 – 10 V, Ratiometric output signal: 10-90% of supply voltage
- A wide range of pressure and electrical connections
- Fully digitally compensated
- For use in ATEX zone 2 explosive atmospheres
- UL approved
DST P110
The Danfoss DST P110 series pressure
transmitter is designed for demanding
refrigeration, air conditioning and industrial
cooling applications, such as:• Chillers
• Transport refrigeration
• Commercial refrigeration
• Variable speed HVAC
• Heat pumps
• Variable refrigerant flow (VRF) Drawn from over 30 years of experience with
MEMS pressure sensing, the DST P110 offers
outstanding performance in a compact and
durable stainless-steel package. Running a powerful ARM-based microcontroller, the DST P110 offers diagnostic features and scalable performance features at a competitive price.
Features and benefits
- Hermetically sealed media interface (all stainless steel, fully welded)
- Compatible with all refrigerants
- Industry leading accuracy over a broad temperature range
- Compact and cost effective design for OEM applications
- Self-diagnostics minimize warranty costs
- Enables harness fault detection
- Superior shock and vibration resistance
- High overload and burst pressure
- Robust electronics platform for harsh electrical environments
- Low heat conduction Bi-metal solder tube (Copper/Stainless Steel) version available.
DST P140
The Danfoss Sensor Technology (DST) P140 is
designed for use in industrial applications like
Booster Pumps and Air Compressors. Drawn from over 30 years of experience with
MEMS technology, the DST P140 offers
outstanding performance in a compact and
durable stainless-steel package. Running a powerful ARM-based microcontroller, the DST P140 offers diagnostic features and performance features at a competitive level.
Features and benefits
- Hermetically sealed media interface (all stainless steel, fully welded)
- Compact and cost effective design for OEM applications
- Superior shock and vibration resistance
- High overload and burst pressure
- Robust electronics platform for harsh electrical environments